Army National Guard Warrior Satellite Training Checklist
Use this When Training your Replacement 

Television: 

-How to power on/off from front panel and remote
-How to change channels and volume using remote or from front panel buttons.
-Demonstrate how to change video sources using remote and on screen menus.
-Let POC know TV must be in the Aux/video source at all times Tech must set the TV monitor properly so that in the event of a power failure it will power up and go to the Aux/video default setting.   

AT Products Phone Convener (see also):

-Demonstrate how calls are made.
-Demonstrate that push-to-talk will enables TV mute function.  Please insure that when depressing mute button on last mic, audio from CNN is muted.
-Show POC how to get into the satellite mode.

VCR:

-How to power on/off with remote and front panel.
-How to adjust volume 
-Show POC that VCR is to be set to a/v mode for the SA 9234 IRD and set to channel 3 for the SA 9235 IRD.

PowerVu Integrated Receiver Descrambler (IRD):

-Show how to power on/off using remote or front panel buttons (power should always be on). -Show method of adjusting volume using remote or front panel right/left arrow buttons. (Volume should always be set at the highest setting).
-Demonstrate channel changing functions using remote and front panel buttons and be sure to let them know what channel they will receive the home channel on (CNN). (Channel ONE)
-It is strongly suggested that you LABEL each remote for your 9234 and 9235 IRDs to keep them straight.

 

I acknowledge training on the basic operational functions of the Army National Guard Warrior Satellite equipment listed above.  

Previous Site Coordinator:   _________________________Date __________                                                 (Signature)                             

New Site Coordinator:          _________________________Date __________
                                               (Signature)

Return to Maintenance Page
Return to DL Networks Homepage